ACIL FM

Nama	Ukuran	Aksi
ad7877.h	835 B	View DL Edit
ads7846.h	2.02 MB	View DL Edit
altera.h	1.15 MB	View DL Edit
at73c213.h	828 B	View DL Edit
at86rf230.h	329 B	View DL Edit
cc2520.h	410 B	View DL Edit
corgi_lcd.h	377 B	View DL Edit
ds1305.h	1.08 MB	View DL Edit
eeprom.h	1.19 MB	View DL Edit
flash.h	1023 B	View DL Edit
libertas_spi.h	700 B	View DL Edit
max7301.h	939 B	View DL Edit
mc33880.h	196 B	View DL Edit
mmc_spi.h	1.27 MB	View DL Edit
mxs-spi.h	4.8 MB	View DL Edit
pxa2xx_spi.h	1.12 MB	View DL Edit
rspi.h	304 B	View DL Edit
s3c24xx-fiq.h	788 B	View DL Edit
s3c24xx.h	684 B	View DL Edit
sh_hspi.h	161 B	View DL Edit
sh_msiof.h	357 B	View DL Edit
spi-fsl-dspi.h	560 B	View DL Edit
spi-mem.h	13.29 MB	View DL Edit
spi.h	57.18 MB	View DL Edit
spi_bitbang.h	1.56 MB	View DL Edit
spi_gpio.h	724 B	View DL Edit
spi_oc_tiny.h	471 B	View DL Edit
tdo24m.h	210 B	View DL Edit
tle62x0.h	265 B	View DL Edit
xilinx_spi.h	627 B	View DL Edit

Edit file: /usr/src/kernels/5.14.0-427.31.1.el9_4.x86_64/include/linux/spi/ds1305.h

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_SPI_DS1305_H
#define __LINUX_SPI_DS1305_H

/*
 * One-time configuration for ds1305 and ds1306 RTC chips.
 *
 * Put a pointer to this in spi_board_info.platform_data if you want to
 * be sure that Linux (re)initializes this as needed ... after losing
 * backup power, and potentially on the first boot.
 */
struct ds1305_platform_data {

/* Trickle charge configuration:  it's OK to leave out the MAGIC
	 * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
	 */
#define DS1305_TRICKLE_MAGIC	0xa0
#define DS1305_TRICKLE_DS2	0x08	/* two diodes */
#define DS1305_TRICKLE_DS1	0x04	/* one diode */
#define DS1305_TRICKLE_2K	0x01	/* 2 KOhm resistance */
#define DS1305_TRICKLE_4K	0x02	/* 4 KOhm resistance */
#define DS1305_TRICKLE_8K	0x03	/* 8 KOhm resistance */
	u8	trickle;

/* set only on ds1306 parts */
	bool	is_ds1306;

/* ds1306 only:  enable 1 Hz output */
	bool	en_1hz;

/* REVISIT:  the driver currently expects nINT0 to be wired
	 * as the alarm IRQ.  ALM1 may also need to be set up ...
	 */
};

#endif /* __LINUX_SPI_DS1305_H */

Batal